Tin tức trong ngành

Trang chủ - Tin tức

CTT remind you to notice the emerging market -- Russia

Nguồn: 中鼎检测 Ngày: 2012-06-05 Duyệt qua: 9403

An increasing number of companies are exploring the emerging market, such as Middle East and Russia, to avoid severe competition in the traditional international market.

In earlier time of this year, Technological Rule for Children’s Safe Product signed by Prime Minister Putin has been effective, which means relevant children’s products should compulsorily meet the regulative requirements under this rule before entering Russian market. Products involved conclude but not limit to the following goods: child care products, toys, garments, shoes, publication, and stationery, etc. Take toys as an example, regulative requirements on them are quite similar to those under EU or USA regulations and standards.

It is the requirements such as mechanical and physical requirements, flammability requirements, migrations of chemical elements, optical requirements and biological requirements that are clearly stipulated under this rule, as well as strict requirements on labeling.

On part of mechanical and physical requirements: for toys used by a child under 3 years of age, no sharp points and edges as well as small parts shall exist in toys; for filled toys, tearing resistance test on the sewing is required; for optical toys, some specific requirements on them are stipulated by Russia.

On part of flammability: flammable materials like Celluloid, etc. are not allowed to be used in toys; for toys that a child can enter, fabric or fur, etc., requirements on burning rate and burning time are specified.

On part of migration of chemical elements: all toys shall meet requirements on migration limit on 8 heavy metals. But for figure paint and modeling clay, the migration limit is stricter than the others. Please refer to the following table for detail information. Besides, surface of toy coming into contact with mouth as well as surface of rattle is not allowed to be covered with any paint or painting.

Additional, on the basis of this rule, except meeting the above-mentioned requirements, all children’s product to be put into Russian market still need to gain GOST-R mark, status of which is similar to CE mark to some extent.

For having a smooth trading in the emerging market, CTT, a professional third party testing body, notices children’s product companies planning to enter Russia shall keep learning characteristics of this market and its controlling requirements on relevant products as well as doing pre-marketing study, so that you can well know yourself and to be prepared to tackle the coming challenges. At last, please be reminded of staying in touch with relevant bodies for fresh information on regulative update.

Mixture Limit of 8 Heavy Metals


Elements

Sb

As

Ba

Cd

Cr

Pb

Hg

Se

Mixture limit of 8 heavy metals in all toys (mg/kg)

All toys except modeling clay

60

25

75

75

75

90

60

500

Modeling clay

60

25

50

50

50

90

25

500


CTT Dịch vụThử nghiệm hàng tiêu dùngThử nghiệm thực phẩm và mỹ phẩmThử nghiệm môi trườngĐào tạo và tư vấn kỹ thuật
Giới thiệu CTTGiới thiệu về ZhongdingCon đường phát triểnNăng lực trình độ
Trung tâm tài nguyênTra cứu báo cáoCảnh báo thu hồiChuyên mục khoa họcTải xuống
Tin tứcTin tức trong ngànhTin tức doanh nghiệpThông tin hoạt động
Liên hệ CTT+84(0)0962 951 885
vn@cttlab.com